Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Increased shaft seal
- Compact yet powerful
- Extended bearing life
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Mounting Type Code | REF! |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| RPM [Min] | 343 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Series | S Series |
| Motor Type | Spool Valve |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| Bolt Circle Dia. | 4.19 in |
| Pilot Diameter | 3.25 in |
| Special Features | None |
| Port Code | A |
| Port Size & Location | SAE-10 Side |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 2664.07 in lb |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Paint Code | A |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Port Size | SAE-10, 7/8-14 UNF |
| Case Drain | None |
| RPM [Max] | 165 rpm, 343 rpm |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Output Shaft Code | 02 |
| Splines | 6 |
| Shaft Size & Type | 1 in - 6T Spline |
| Case Drain Code | 0 |
| Shaft Type | Splined |
| Displacement (in³/rev) | 10.07 |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1900 psi |
| Weight | 29.0 LB |
