Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 4.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| RPM [Min] | 792 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 1325 in lb |
| Mounting Hole Size | 3/8 in |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Case Drain | None |
| Case Drain Code | 0 |
| Pressure [Max] | 2000 psi |
| Pilot Diameter | 1.75 in |
| Mounting Holes | 3/8-16 |
| Corrosion Resistant | No |
| Paint Code | A |
| Material | Cast Iron |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| RPM [Max] | 792 rpm |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Displacement (in³/rev) | 4.6 |
| Maximum Speed @ Continuous Flow | 792 rpm @ 15 gal/min |
| Port Code | C |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Series | S Series |
| Bolt Circle Dia. | 3 1/4 in |
| Splines | 0 |
| Rotation | Standard Rotation |
| Flow Rate | 15 gal/min |
| Mount Type | 4 Bolt |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Mounting Type Code | REF! |
| Flow [Max] | 15 gal/min |
| Port Type | Manifold |
| Weight | 29.0 LB |
