Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Splines | 0 |
| Case Drain Code | 1 |
| Shaft Type | Straight w/ Woodruff Key |
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Mounting Holes | 0.535 in |
| Special Features | None |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Mounting Type Code | A |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1450 psi |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.535 in |
| Series | H Series |
| Port Size | SAE-10, 7/8-14 UNF |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| RPM [Min] | 243 rpm |
| Flange Orientation | Standard |
| RPM [Max] | 243 rpm |
| Displacement (in³/rev) | 14.1 |
| Special Features Assembly Code | 0 |
| Flow Rate | 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 01 |
| Port Size & Location | SAE-10 Side |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Port Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
