Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size | SAE-10 |
| Seal Material | Buna-N |
| Splines | 0 |
| Mounting Hole Size | 3/8 in |
| Mounting Type Code | B |
| Port Type | SAE O-Ring |
| Motor Element | Gerotor |
| Port Code | A |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| Shaft Type | Straight w/ Cross Hole |
| Special Features Hardware Code | AA |
| Pilot Diameter | 1.75 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Port Location | Side Port |
| RPM [Max] | 1021 rpm |
| Displacement (in³/rev) | 2.2 |
| Bolt Circle Dia. | 3 1/4 in |
| Duty | Standard-Duty |
| Flow [Max] | 10 gal/min |
| Shaft Size & Type | Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | Free Running Gerotor |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Port Size & Location | SAE-10 Side |
| Case Drain | None |
| Paint Code | A |
| Output Shaft Code | 07 |
| Weight | 11.2 LB |
