Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Special Features Assembly Code | 0 |
| Special Features | None |
| RPM [Max] | 469 rpm |
| RPM [Min] | 469 rpm |
| Port Type | Manifold |
| Output Shaft Code | 24 |
| Shaft Size & Type | Straight |
| Pilot Diameter | 3.25 in |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | Manifold, M8 x 1.25 Threads |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Flange Orientation | Standard |
| Series | H Series |
| Flow Rate | 57 lpm |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Code | D |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Splines | 0 |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Paint Code | A |
| Case Drain | G 1/4 (BSP) |
| Shaft Type | Straight |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Case Drain Code | 2 |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 7.32 |
| Weight | 13.0 LB |
