Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1800 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Case Drain Code | 2 |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| Mount Type | 2 Bolt |
| Port Size | 1/2 |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Flow [Max] | 15 gal/min |
| Port Type | BSPP |
| Port Code | E |
| Mounting Hole Size | 0.565 in |
| Bolt Circle Dia. | 4.187 in |
| Flow Rate | 57 lpm |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 7.32 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Splines | 0 |
| Paint Code | A |
| Special Features | None |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| RPM [Min] | 469 rpm |
| Case Drain | G 1/4 (BSP) |
| RPM [Max] | 469 rpm |
| Weight | 13.0 LB |
