Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 7.3 |
| Motor Type | Spool Valve |
| Mounting Hole Size | 0.535 in |
| Mounting Holes | 0.535 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Shaft Type | Straight w/ Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | Manifold |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Paint Code | A |
| RPM [Min] | 469 rpm |
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Splines | 0 |
| Mount Type | 2 Bolt |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.19 in |
| Seal Material | Buna-N |
| RPM [Max] | 469 rpm |
| Special Features | None |
| Port Code | C |
| Output Shaft Code | 01 |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Weight | 12.1 LB |
