Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 24 |
| Special Features | None |
| Splines | 0 |
| Seal Material | Buna-N |
| Series | H Series |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Flow Rate | 14 gal/min |
| Port Size | 1/2, G 1/2 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Pressure [Max] | 1450 psi |
| Shaft Type | Straight |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Shaft Size & Type | Straight |
| Duty | Standard-Duty |
| Port Type | BSPP |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Port Code | E |
| Pilot Diameter | 3.25 in |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| RPM [Max] | 243 rpm |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.187 in |
| Displacement (in³/rev) | 14.1 |
| Case Drain Code | 2 |
| RPM [Min] | 243 rpm |
| Mounting Type Code | A |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Weight | 13.0 LB |
