Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 22.58 |
| Shaft Type | Straight |
| Output Shaft Code | 24 |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Port Type | Manifold |
| Mounting Type Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | Straight |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 3604 in lb |
| Motor Type | Spool Valve |
| Port Size | Manifold, M8 x 1.25 Threads |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Pressure [Max] | 1250 psi |
| Seal Material | Buna-N |
| Port Code | D |
| Mounting Hole Size | 0.565 in |
| Case Drain Code | 2 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 152 rpm |
| Special Features Hardware Code | 00 |
| Flow Rate | 57 lpm |
| Special Features | None |
| Series | H Series |
| Corrosion Resistant | No |
| Splines | 0 |
| RPM [Max] | 152 rpm |
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Flange Orientation | Standard |
| Case Drain | G 1/4 (BSP) |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
