Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Shaft Code | 24 |
| Flow Rate | 57 lpm |
| Mounting Hole Size | 0.565 in |
| RPM [Max] | 243 rpm |
| Port Code | D |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Shaft Size & Type | Straight |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 243 rpm |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Port Type | Manifold |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | Manifold, M8 x 1.25 Threads |
| Displacement (in³/rev) | 14.1 |
| Splines | 0 |
| Mounting Type Code | A |
| Special Features | None |
| Pressure [Max] | 1450 psi |
| Bolt Circle Dia. | 4.187 in |
| Shaft Type | Straight |
| Case Drain | G 1/4 (BSP) |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Case Drain Code | 2 |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Series | H Series |
| Weight | 13.0 LB |
