Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mount Type | 2 Bolt |
| Case Drain | G 1/4 (BSP) |
| Special Features | None |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 24 |
| Corrosion Resistant | No |
| Port Type | Manifold |
| RPM [Max] | 304 rpm |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Series | H Series |
| Pressure [Max] | 1600 psi |
| Port Size | Manifold, M8 x 1.25 Threads |
| Case Drain Code | 2 |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.187 in |
| Splines | 0 |
| Mounting Hole Size | 0.565 in |
| Shaft Size & Type | Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 11.29 |
| Port Code | D |
| Shaft Type | Straight |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Flow [Max] | 15 gal/min |
| Paint Code | A |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
