Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- M8 X 1.25-6H Manifold Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Max] | 585 rpm |
| Displacement (in³/rev) | 5.9 |
| Flange Orientation | Standard |
| RPM [Min] | 585 rpm |
| Pressure [Max] | 1800 psi |
| Paint Code | A |
| Flow Rate | 15 gal/min |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 24 |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Case Drain Code | 2 |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Shaft Size & Type | Straight |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
| Port Code | D |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Port Type | Manifold |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.535 in |
| Special Features | None |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Corrosion Resistant | No |
| Weight | 13.0 LB |
