Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Code | E |
| Corrosion Resistant | No |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Splines | 0 |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Port Size | 1/2, G 1/2 |
| Port Type | BSPP |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain Code | 2 |
| Pressure [Max] | 1350 psi |
| Series | H Series |
| Bolt Circle Dia. | 4.19 in |
| Paint Code | A |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 17.9 |
| Special Features | None |
| RPM [Max] | 192 rpm |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Weight | 13.0 LB |
