Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Element | Gerotor |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Duty | Standard-Duty |
| Flow [Max] | 12 gal/min |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | 00 |
| Paint Code | A |
| Port Size & Location | SAE-10 Side |
| Port Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | Straight |
| Port Size | SAE-10, 7/8-14 UNF |
| Displacement (in³/rev) | 2.8 |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| RPM [Max] | 969 rpm |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Cross Hole |
| Case Drain | None |
| RPM [Min] | 969 rpm |
| Splines | 0 |
| Bolt Circle Dia. | 4.19 in |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Flow Rate | 12 gal/min |
| Corrosion Resistant | No |
| Output Shaft Code | 08 |
| Mount Type | 2 Bolt |
| Port Type | SAE O-Ring |
| Special Features | None |
| Mounting Holes | 0.535 in |
| Weight | 11.2 LB |
