Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 11.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Port Size | 1/2, 1/2-14 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 304 rpm |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| RPM [Max] | 304 rpm |
| Flow [Max] | 15 gal/min |
| Flow Rate | 15 gal/min |
| Output Shaft Code | 02 |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Splines | 6 |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Size & Type | 1 in - 6T Spline |
| Special Features | None |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | None |
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 11.3 |
| Special Features Hardware Code | 00 |
| Shaft Type | Splined |
| Mounting Hole Size | 0.535 in |
| Rotation | Standard Rotation |
| Pressure [Max] | 1600 psi |
| Series | H Series |
| Port Location | Side Port |
| Mounting Type Code | A |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Port Code | B |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Paint Code | A |
| Mount Type | 2 Bolt |
| Weight | 12.8 LB |
