Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Mounting Type Code | B |
| Splines | 6 |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1450 psi |
| Pilot Diameter | 1.75 in |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Output Shaft Code | 02 |
| Flow Rate | 15 gal/min |
| Series | H Series |
| Shaft Size & Type | 1 in - 6T Spline |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Port Code | B |
| Material | Cast Iron |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Port Type | NPTF |
| Special Features | None |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Port Size | 1/2, 1/2-14 |
| Displacement (in³/rev) | 14.1 |
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Shaft Type | Splined |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| RPM [Max] | 243 rpm |
| Case Drain Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Rotation | Standard Rotation |
| RPM [Min] | 243 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 13.3 LB |
