Skip to content Skip to navigation menu
Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor

101-1030-009

Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Item #100152216
  • Spool Motor
  • Gerotor
  • Spool Valve
  • 1/2-14 NPTF Port
  • 14.1 Cubic Inch Displacement Per Rev
  • Straight Shaft
+ Show More + Show Less
Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Spool Motor
  • Gerotor
  • Spool Valve
  • 1/2-14 NPTF Port
  • 14.1 Cubic Inch Displacement Per Rev

description

  • Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.

applications

  • Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers

features

  • Integrated proven orbit motor principle results in a compact yet powerful package
  • Hydrodynamic journal bearings extend bearing life
  • Three-zone pressure design allows for an increased shaft seal and bearing life
  • Additional configurations available
  • please contact your local Applied® service center for more information

options

  • Five mounting styles
  • Low-speed spool
  • Nine shaft options
  • Speed sensors
Case Drain Code 0
Flow [Max] 15 gal/min
Seal Material Buna-N
Bolt Circle Dia. 4.187 in
Mounting Type Code A
Pressure [Max] 1450 psi
Corrosion Resistant No
Paint/Packaging Primer Low Gloss Black, Individual Box
Port Size & Location 1/2 in NPTF Side
Port Location Side Port
Shaft Size & Type 1 in x 1/4 in Straight
Mounting Holes 0.535 in
RPM [Max] 243 rpm
Shaft Type Straight w/ Woodruff Key
Port Size 1/2, 1/2-14
Pilot Diameter 3.25 in
Motor Type Spool Valve
Displacement (in³/rev) 14.1
Series H Series
Port Type NPTF
Rotation Standard Rotation
Case Drain None
Flow Rate 14 gal/min
Output Torque at Rated PSI (inch/pounds) 2673 in lb
Output Shaft Code 01
Special Features Assembly Code 0
Mount Type 2 Bolt, SAE-A
RPM [Min] 243 rpm
Material Cast Iron
Inlet Pressure [Max] 2500 psi
Duty Standard-Duty
Maximum Speed @ Continuous Flow 243 rpm @ 15 gal/min
Paint Code A
Special Features Hardware Code 00
Motor Element Gerotor
Flange Orientation Standard
Splines 0
Mounting Hole Size 0.565 in
Port Code B
Weight 13.75 LB
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison