Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 25 Teeth
- 2 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Bore Type | Finished |
| Torque at 600 RPM | 641 lb/in |
| Material | Steel |
| Pitch Diameter | 2.5 in |
| Outside Dia. | 2.7 in |
| Diametral Pitch | 10 |
| Torque at 1800 RPM | 358 lb/in |
| Keyway | w/Setscrew |
| Hub Dia. | 2.11 in |
| Torque at 900 RPM | 535 lb/in |
| Torque at 200 RPM | 870 lb/in |
| Set Screw | Yes |
| Torque at 1200 RPM | 459 lb/in |
| Origin | Finished Bore |
| No. of Teeth | 25 |
| Pressure Angle | 20 ° |
| Torque at 300 RPM | 799 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.87 in |
| Bore Size | 1 in |
| Set Screw Size | 1 |
| Weight | 2.001 LB |
| EAN or UPC | 781711461846 |
