Find a Service Center
- .94" Center Distance
- 300:1 Ratio
- Shaft Input
- Right Output
- Parallel Worm Position
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Shaft Assembly Code | G |
| Reduction Type | Double Reduction |
| Output Configuration | Right Output |
| Frame | N/A |
| Box Width | 4 in |
| Bolt Center | 2 3/8" x 3 5/8" |
| Input Configuration | Shaft Input |
| Washdown Duty | No |
| Base to Centerline of Input Shaft | 2 1/2 in |
| Torque Out @ 1750 rpm | 45 in lb |
| Fan Cooled | No |
| Family Name | WA |
| Lubrication | Mobil SHC634 Synthetic |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Output (Shaft or Bore) Size | 1/2 in |
| Housing Material | Cast Iron |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Parallel |
| Output RPM @ 1750 rpm Input | 5.8 rpm |
| Box Length | 2 3/8 in |
| Motor Application | General Purpose |
| Box Height | 3 9/16 in |
| Input (Shaft or Bore) Size | 5/16 in |
| Frame Size | Shaft Input, Not a C-Face |
| Ratio | 300:1 |
| Torque Out @ 1150 rpm | N/A |
| Installed Options | Low Horizontal Base |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Center Distance | 0.94 in |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Weight | 10.1 LB |
| EAN or UPC | 781711455883 |
