
- Size 146
- 1:1 Ratio
- Vertical, Single, Clockwise, Up Output
- Horizontal Shaft Input, Facing You
description
- Designed for high efficiency, quiet operation and long service life.
features
- Gears are made of hardened alloy steel
- Shafts are heat-treated alloy steel mounted on heavy-duty, tapered roller bearings
- Housings are made of cast iron, precision-machined to ensure accurate, permanent alignment of the gears
- Shaft projections have quality oil seals
- Assembly can be mounted in any position with input shaft horizontal by relocating oil plugs in proper position
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Assembly | P |
Gear Style | Spiral Bevel |
Max. Overhung Load @ 1750 rpm | 631 lb/in |
Output Relation to Base | Vertical |
Relative Shaft Rotation | Clockwise |
Output RPM @ 1750 rpm Input | 1750 rpm |
Output Configuration | Single |
Torque Out @ 1750 rpm | 905 in lb |
Box Height | 4.78 in |
Box Width | 8.78 in |
Bolt Hole Pattern | 6 in x 6 in |
Input (Shaft or Bore) Size | 1 in |
Washdown Duty | No |
Bearing Type | Roller Bearing |
Input Shaft Position | Facing You |
Box Length | 10.56 in |
Shaft Arrangement | #14 |
Input Relation to Base | Horizontal |
Output Shaft Position | Up |
Ratio | 1:1 |
Unit Size | 146 |
Input Configuration | Shaft Input |
Torque Out @ 1150 rpm | 1012 in lb |
Output (Shaft or Bore) Size | 1 in |
Weight | 51.1 LB |
EAN or UPC | 781711422526 |
