RFWC726-900-B5-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871429

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Torque Out @ 1150 rpm	N/A
Input (Shaft or Bore) Size	5/8 in
Base to Shaft Center Height w/Std. Base Kit	5.81 in
Box Width	6 in
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Output RPM @ 1750 rpm Input	1.94 rpm
Bolt Center	6 3/8 in x 3 3/8 in
Family Name	RFWC
Keyway Size	3/16 x 3/32
Max. Overhung Load @ 1750 rpm	1000 lb/in
Frame	56C
Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Washdown Duty	No
Bore Code	B5
Center Distance	2 5/8 in
Worm Position	Universal¦Right Angle
Box Length	11 21/32 in
Output Configuration	Left Output
Torque Out @ 1750 rpm	2000 in lb
Ratio	900:1
Base to Centerline of Input Shaft	N/A
Fan Cooled	No
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Motor Application	General Purpose
Reduction Type	Double Reduction
Output (Shaft or Bore) Size	1 1/8 in
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Input Configuration	C-Face Coupled
Shaft Assembly Code	G
Thermal Input Horsepower @ 1750 RPM	N/A
Box Height	8 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Frame Size	56C
Max. Thrust Load @ 1150 rpm	900 lb/in
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Base to Centerline of Output Shaft	2 15/16 in
Housing Material	Cast Iron
Lubrication	None
HP @ RPM	0.25 hp @ 1800 rpm
Motor HP	0.17 hp
Weight	63.1 LB
EAN or UPC	781711531167