RFWC726-1200-B5-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871430

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Lubrication	None
Frame	56C
Reduction Type	Double Reduction
Frame Size	56C
Box Height	8 in
Thermal Input Horsepower @ 1750 RPM	N/A
Worm Position	Universal¦Right Angle
Bolt Center	6 3/8 in x 3 3/8 in
Ratio	1200:1
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Max. Overhung Load @ 1750 rpm	1000 lb/in
Family Name	RFWC
Input (Shaft or Bore) Size	5/8 in
Output RPM @ 1750 rpm Input	1.46 rpm
Fan Cooled	No
Output (Shaft or Bore) Size	1 1/8 in
Input Configuration	C-Face Coupled
Bore Code	B5
Box Length	11 21/32 in
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Motor HP	0.17 hp
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Keyway Size	3/16 x 3/32
Shaft Assembly Code	G
HP @ RPM	0.25 hp @ 1800 rpm
Torque Out @ 1750 rpm	1950 in lb
Torque Out @ 1150 rpm	N/A
Motor Application	General Purpose
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Center Distance	2 5/8 in
Washdown Duty	No
Output Configuration	Left Output
Base to Centerline of Input Shaft	N/A
Box Width	6 in
Housing Material	Cast Iron
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Base to Centerline of Output Shaft	2 15/16 in
Max. Thrust Load @ 1150 rpm	900 lb/in
Base to Shaft Center Height w/Std. Base Kit	5.81 in
Weight	63.1 LB
EAN or UPC	781711531174