RFWC718-900-B4-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101877750

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Drives used in a vertical mounting application may require additional pipe plugs and/or grease fittings for proper lubrication and are considered special.
High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.

Specifications

Max. Overhung Load @ 1750 rpm	500 lb/in
Keyway Size	1/8 x 1/16
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Base to Centerline of Input Shaft	N/A
Box Height	5 3/4 in
Bore Code	B4
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Base to Centerline of Output Shaft	2 1/16 in
Output RPM @ 1750 rpm Input	1.94 rpm
Ratio	900:1
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Center Distance	1 3/4 in
Output (Shaft or Bore) Size	7/8 in
Worm Position	Universal¦Right Angle
Input (Shaft or Bore) Size	1/2 in
Motor HP	0.17 hp
Housing Material	Cast Iron
Max. Thrust Load @ 1150 rpm	500 lb/in
Thermal Input Horsepower @ 1750 RPM	N/A
Output Configuration	Left Output
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Torque Out @ 1150 rpm	N/A
Torque Out @ 1750 rpm	710 in lb
Lubrication	None
Shaft Assembly Code	G
Frame Size	42CZ
Motor Application	General Purpose
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
HP @ RPM	0.08333333 hp @ 1800 rpm
Box Width	8 7/8 in
Washdown Duty	No
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Fan Cooled	No
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Frame	42CZ
Reduction Type	Double Reduction
Box Length	5 1/16 in
Input Configuration	C-Face Coupled
Bolt Center	4 3/16 in x 2 3/4 in
Family Name	RFWC
Weight	34.1 LB
EAN or UPC	781711530993