
- 1 3/4" Center Distance
- 5:1 Ratio
- 140TC or 180C Frame
- C-Face Coupled Input
- Left & Right Output
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Output (Shaft or Bore) Size | 7/8 in |
Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
Output RPM @ 1750 rpm Input | 350 rpm |
Motor HP | 2 hp |
Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
Washdown Duty | No |
Thermal Input Horsepower @ 1750 RPM | N/A |
Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
Output Configuration | Left & Right Output |
Input Configuration | C-Face Coupled |
Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
Output Torque @ RPM | 350 in lb @ 1150 rpm, 432 in lb @ 1750 rpm |
Frame | 140TC, 180C |
Torque Out @ 1150 rpm | 350 in lb |
Max. Overhung Load @ 1750 rpm | 500 lb/in |
Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
Frame Size | 140TC, 180C |
Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
Center Distance | 1 3/4 in |
Ratio | 5:1 |
Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
Motor Application | General Purpose |
Box Length | 5 1/2 in |
Housing Material | Cast Iron |
Keyway Size | 3/16 x 3/32 |
Worm Position | Universal |
Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
Input HP @ RPM | 1.42 hp @ 1150 rpm, 2.55 hp @ 1750 rpm |
Reduction Type | Single Reduction |
Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
Shaft Assembly Code | H |
Max. Thrust Load @ 1150 rpm | 500 lb/in |
Fan Cooled | No |
Base to Centerline of Output Shaft | 2.0625 in |
Base to Centerline of Input Shaft | 3.8125 in |
Box Width | 5 1/32 in |
Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
Lubrication | None |
Box Height | 5 3/4 in |
Torque Out @ 1750 rpm | 432 in lb |
Family Name | RF |
Bolt Center | 4 3/16 in x 2 3/4 in |
Max. Input HP @ 100 rpm | 0.17 hp |
Input (Shaft or Bore) Size | 7/8 in |
Bore Code | B7 |
Use With | 718 |
HP @ RPM | 2 hp @ 1800 rpm |
Weight | 27.1 LB |
EAN or UPC | 781711528709 |
