Find a Service Center
- Size 1214
- 2:1 Ratio
- Single, Counter Clockwise, Left Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Assembly | F |
| Input Relation to Base | No Base |
| Output (Shaft or Bore) Size | 1 in |
| Box Width | 7 in |
| Output Shaft Position | Left |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Box Height | 4 1/8 in |
| Input Configuration | Shaft Input |
| Shaft Arrangement | #4 |
| Output Configuration | Single |
| Ratio | 2:1 |
| Box Length | 8 1/8 in |
| Input (Shaft or Bore) Size | 1 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Torque Out @ 1150 rpm | 697 in lb |
| Bearing Type | Roller Bearing |
| Unit Size | 1214 |
| Torque Out @ 1750 rpm | 563 in lb |
| Gear Style | Spiral Bevel |
| Washdown Duty | No |
| Input Shaft Position | Facing You |
| Output Relation to Base | No Base |
| Relative Shaft Rotation | Counter Clockwise |
| Output RPM @ 1750 rpm Input | 875 rpm |
| Weight | 25.001 LB |
| EAN or UPC | 781711610497 |
