Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 14.5° Pressure Angle
- 11 Teeth
- 1.200" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Torque at 1200 RPM | 147 lb/in |
| Outside Dia. | 1.4 in |
| Pitch Diameter | 1.2 in |
| Set Screw Size | 5/8 |
| Diametral Pitch | 10 |
| Bore Type | Finished |
| Torque at 600 RPM | 179 lb/in |
| Hub Dia. | 0.92 in |
| Torque at 900 RPM | 162 lb/in |
| Material | Steel |
| Keyway | w/Setscrew |
| Bore Size | 0.625 in |
| Torque at 200 RPM | 211 lb/in |
| Length Through Bore | 1.62 in |
| No. of Teeth | 11 |
| Torque at 1800 RPM | 124 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Origin | Finished Bore |
| Torque at 300 RPM | 202 lb/in |
| Pressure Angle | 14.5 ° |
| Set Screw | Yes |
| Weight | 0.281 LB |
| EAN or UPC | 781711460801 |
