Find a Service Center
Alternate Products
- Finished Steel Gear
- 12 Diametral Pitch
- 14.5° Pressure Angle
- 18 Teeth
- 1 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
| Keyway | w/Setscrew |
| Torque at 900 RPM | 159 lb/in |
| Hub Dia. | 1.14 in |
| Diametral Pitch | 12 |
| Material | Steel |
| Bore Size | 0.625 in |
| Pitch Diameter | 1.5 in |
| Torque at 1200 RPM | 142 lb/in |
| Length Through Bore | 1.25 in |
| Set Screw | Yes |
| Origin | Finished Bore |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 300 RPM | 242 lb/in |
| Torque at 1800 RPM | 116 lb/in |
| Set Screw Size | 5/8 |
| Torque at 600 RPM | 182 lb/in |
| Torque at 200 RPM | 224 lb/in |
| Pressure Angle | 14.5 ° |
| Outside Dia. | 1.67 in |
| Bore Type | Finished |
| No. of Teeth | 18 |
| Weight | 0.431 LB |
| EAN or UPC | 781711460665 |
