Find a Service Center
Alternate Products
- Finished Steel Gear
- 16 Diametral Pitch
- 14.5° Pressure Angle
- 12 Teeth
- 3/4" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Four ball wear test 40 kg: 63 mm
- More cost effective, quieter running and metallic options
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Reliability from steel, cast iron and brass
| Length Through Bore | 0.94 in |
| Set Screw Size | 3/8 |
| Hub Dia. | 0.56 in |
| Pressure Angle | 14.5 ° |
| Material | Steel |
| Torque at 600 RPM | 41.2 lb/in |
| Torque at 1800 RPM | 31 lb/in |
| Outside Dia. | 0.875 in |
| Torque at 200 RPM | 46.3 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Diametral Pitch | 16 |
| Torque at 900 RPM | 38.1 lb/in |
| Torque at 1200 RPM | 35.4 lb/in |
| Set Screw | Yes |
| Bore Size | 0.375 in |
| Torque at 300 RPM | 44.9 lb/in |
| Origin | Finished Bore |
| Keyway | w/Setscrew |
| Bore Type | Finished |
| No. of Teeth | 12 |
| Pitch Diameter | 0.75 in |
| Weight | 0.061 LB |
| EAN or UPC | 781711460306 |
