
- 2 5/8" Center Distance
- 40:1 Ratio
- 56C Frame
- C-Face Quilled Input
- Hollow Output
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
Frame Size | 56C |
Base to Centerline of Output Shaft | 2 7/16 in |
Motor Application | General Purpose |
Center Distance | 2 5/8 in |
Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
Output RPM @ 1750 rpm Input | 44 rpm |
Max. Input HP @ 100 rpm | 0.14 hp |
Keyway Size | 3/16 x 3/32 |
Torque Out @ 1750 rpm | 1512 in lb |
Torque Out @ 1150 rpm | 1500 in lb |
Frame | 56C |
Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
Box Height | 8 in |
Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
Thermal Input Horsepower @ 1750 RPM | N/A |
Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
Worm Position | Universal |
Washdown Duty | No |
Input (Shaft or Bore) Size | 5/8 in |
Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
Box Width | 5 21/64 in |
Max. Overhung Load @ 1750 rpm | 1000 lb/in |
Bore Code | B5 |
Output Torque @ RPM | 1500 in lb @ 1150 rpm, 1512 in lb @ 1750 rpm |
Max. Thrust Load @ 1150 rpm | 900 lb/in |
Use With | 726 |
HP @ RPM | 1 hp @ 1800 rpm |
Base to Centerline of Input Shaft | 5 9/16 in |
Output Configuration | Hollow Output |
Bolt Center | 6 3/8 in x 3 3/8 in |
Lubrication | None |
Fan Cooled | No |
Input Configuration | C-Face Quilled |
Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
Family Name | HF |
Reduction Type | Single Reduction |
Shaft Assembly Code | H |
Motor HP | 1 hp |
Ratio | 40:1 |
Box Length | 7 3/8 in |
Housing Material | Cast Iron |
Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
Output (Shaft or Bore) Size | 1 1/2 in |
Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
Weight | 45.1 LB |
EAN or UPC | 781711630785 |
