Skip to content Skip to navigation menu
Boston GearHF721-20-B5-H-P16

HF721-20-B5-H-P16

700 Series Bostmount C-Face Quilled Reducer
Item #101795384
  • 2 1/16" Center Distance
  • 20:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Hollow Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
Boston GearHF721-20-B5-H-P16
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 1/16" Center Distance
  • 20:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Hollow Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Frame Size 56C
Bolt Center Length x Bolt Center Width 5 in x 2 7/8 in
Base to Shaft Center Height w/Low Vert. Base Kit 3.13 in
Base to Centerline of Output Shaft 2 9/32 in
HP @ RPM 1 hp @ 1800 rpm
Motor HP 1 hp
Output Torque @ RPM 782 in lb @ 1150 rpm, 892 in lb @ 1750 rpm
Max. Thrust Load @ 1150 rpm 700 lb/in
Washdown Duty No
Fan Cooled No
Max. Thrust Load @ RPM 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm
Max. Overhung Load @ RPM 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm
Input HP @ RPM 0.86 hp @ 1150 rpm, 1.4 hp @ 1750 rpm
Base to Centerline of Input Shaft 4 11/32 in
Output RPM @ 1750 rpm Input 87.5 rpm
Ratio 20:1
Bolt Centers w/ Vertical "J" Base Kit (in) 8.63 x 2.63
Keyway Size 3/16 x 3/32
Lubrication None
Torque Out @ 1150 rpm 782 in lb
Input (Shaft or Bore) Size 5/8 in
Family Name HF
Bolt Centers w/ Std. Base Kit (in) 6 3/8 x 4 11/16
Center Distance 2.0625 in
Bolt Centers w/ Vertical Base Kits (in) 8 3/8 x 4 7/8
Output (Shaft or Bore) Size 1 in
Output Configuration Hollow Output
Bore Code B5
Frame 56C
Housing Material Cast Iron
Base to Shaft Center Height w/Vert. "J" Base Kit 3.94 in
Torque Out @ 1750 rpm 892 in lb
Input Configuration C-Face Quilled
Motor Application General Purpose
Base to Shaft Center Height w/High Vert. Base Kit 4.88 in
Box Height 6 3/8 in
Shaft Assembly Code H
Max. Input HP @ 100 rpm 0.11 hp
Max. Overhung Load @ 1750 rpm 700 lb/in
Worm Position Universal
Base to Shaft Center Height w/Std. Base Kit 4.81 in
Reduction Type Single Reduction
Output RPM @ Input RPM 88 rpm @ 1750 rpm
Thermal Input Horsepower @ 1750 RPM N/A
Box Width 4 45/64 in
Bolt Center 5 in x 2 7/8 in
Use With 721
Box Length 6 in
Weight 26.1 LB
EAN or UPC 781711630358
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison