FWC726-100-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #102124113

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

All conveyor troughs should have some type of cover not only to keep material inside the trough and to protect material in the trough from outside elements, but also as a safety precaution.

Specifications

Bore Code	B5
Motor Application	General Purpose
Box Length	11 21/32 in
Output (Shaft or Bore) Size	1 1/8 in
Box Height	8 in
Reduction Type	Double Reduction
Torque Out @ 1750 rpm	1785 in lb
Input (Shaft or Bore) Size	5/8 in
Box Width	6 in
Base to Shaft Center Height w/Std. Base Kit	5.81 in
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Washdown Duty	No
Housing Material	Cast Iron
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Family Name	FWC
Output RPM @ 1750 rpm Input	17.5 rpm
Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Worm Position	Universal¦Right Angle
HP @ RPM	0.75 hp @ 1800 rpm
Output Configuration	Left Output
Thermal Input Horsepower @ 1750 RPM	N/A
Base to Centerline of Input Shaft	N/A
Frame Size	56C
Center Distance	2 5/8 in
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Frame	56C
Ratio	100:1
Torque Out @ 1150 rpm	N/A
Bolt Center	6 3/8 in x 3 3/8 in
Max. Overhung Load @ 1750 rpm	1000 lb/in
Motor HP	3/4 hp
Base to Centerline of Output Shaft	2 15/16 in
Input Configuration	C-Face Quilled
Shaft Assembly Code	G
Lubrication	None
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Max. Thrust Load @ 1150 rpm	900 lb/in
Keyway Size	3/16 x 3/32
Fan Cooled	No
Weight	51.1 LB
EAN or UPC	781711524565