Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F738-15F-B9-J

700 Series C-Face Quilled Reducer
Item #101877765
  • 3 3/4" Center Distance
  • 15:1 Ratio
  • 180TC or 210C Frame
  • w/Fan
  • C-Face Quilled Input
  • Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3 3/4" Center Distance
  • 15:1 Ratio
  • 180TC or 210C Frame
  • w/Fan
  • C-Face Quilled Input

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Torque Out @ 1750 rpm 3543 in lb
Bore Code B9
Bolt Centers w/ Vertical Base Kits (in) 13.94 x 8.00
Center Distance 3 3/4 in
Housing Material Cast Iron
Box Length 10 in
Lubrication None
Bolt Center 8 1/2 in x 4 3/4 in
Installed Options Fan
Max. Thrust Load @ 1150 rpm 1300 lb/in
Max. Input HP @ 100 rpm 0.68 hp
Base to Centerline of Input Shaft 7 5/8 in
Output Torque @ RPM 3543 in lb @ 1750 rpm, 3600 in lb @ 1150 rpm
Output RPM @ 1750 rpm Input 117 rpm
Keyway Size 1/4 x 1/8
Frame 180TC, 210C
Fan Cooled Yes
Box Height 10 7/16 in
Washdown Duty No
Box Width 8 3/8 in
Motor Application General Purpose
Family Name F
Reduction Type Single Reduction
Motor HP 5 hp
Max. Thrust Load @ RPM 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 10 3/8 x 7
Output Configuration Right Output
Worm Position Universal
Ratio 15:1
Output RPM @ Input RPM 117 rpm @ 1750 rpm
Base to Shaft Center Height w/Low Vert. Base Kit 5 1/4 in
Frame Size 180TC, 210C
HP @ RPM 5 hp @ 1800 rpm
Input Configuration C-Face Quilled
Base to Centerline of Output Shaft 3 7/8 in
Shaft Assembly Code J
Max. Overhung Load @ RPM 2000 lb/in @ 1150 rpm, 2000 lb/in @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit 7 1/2 in
Input (Shaft or Bore) Size 1 1/8 in
Torque Out @ 1150 rpm 3600 in lb
Max. Overhung Load @ 1750 rpm 2000 lb/in
Thermal Input Horsepower @ 1750 RPM N/A
Output (Shaft or Bore) Size 1 5/8 in
Base to Shaft Center Height w/High Vert. Base Kit 7 in
Input HP @ RPM 4.99 hp @ 1150 rpm, 7.47 hp @ 1750 rpm
Weight 86.1 LB
EAN or UPC 781711534915
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison