Find a Service Center
- 3" Center Distance
- 30:1 Ratio
- C-Face Quilled
- Left Output
- 56C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Torque Out @ 1750 rpm | 2045 in lb |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Input Configuration | C-Face Quilled |
| Ratio | 30:1 |
| Fan Cooled | No |
| Frame | 56C |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Box Width | 6 49/64 in |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Motor Application | General Purpose |
| Output Configuration | Left Output |
| Frame Size | 56C |
| Lubrication | None |
| Worm Position | Universal |
| Input HP @ RPM | 1.99 hp @ 1150 rpm, 2.27 hp @ 1750 rpm |
| Torque Out @ 1150 rpm | 2510 in lb |
| Center Distance | 3 in |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Family Name | F |
| Output Torque @ RPM | 2045 in lb @ 1750 rpm, 2510 in lb @ 1150 rpm |
| Washdown Duty | No |
| Box Length | 8 1/8 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Use With | 730 |
| Box Height | 8 7/8 in |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Bolt Center | 7 in x 4 in |
| Housing Material | Cast Iron |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Reduction Type | Single Reduction |
| HP @ RPM | 2 hp @ 1800 rpm |
| Weight | 55.1 LB |
| EAN or UPC | 781711607060 |
