Find a Service Center
- 3" Center Distance
- 25:1 Ratio
- C-Face Quilled
- Right Output
- 140TC/180C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Input Configuration | C-Face Quilled |
| Motor Application | General Purpose |
| Box Height | 8 7/8 in |
| Use With | 730 |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Bolt Center | 7 in x 4 in |
| Output Torque @ RPM | 2051 in lb @ 1750 rpm, 2560 in lb @ 1150 rpm |
| Torque Out @ 1150 rpm | 2560 in lb |
| Output Configuration | Right Output |
| Reduction Type | Single Reduction |
| Input (Shaft or Bore) Size | 7/8 in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Frame | 140TC, 180C |
| Family Name | F |
| Worm Position | Universal |
| Torque Out @ 1750 rpm | 2051 in lb |
| Box Length | 8 1/8 in |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Ratio | 25:1 |
| Washdown Duty | No |
| Box Width | 6 49/64 in |
| Housing Material | Cast Iron |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 2 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Center Distance | 3 in |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Frame Size | 140TC, 180C |
| Input HP @ RPM | 2.3 hp @ 1150 rpm, 2.61 hp @ 1750 rpm |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Weight | 55.1 LB |
| EAN or UPC | 781711607022 |
