Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F724-30-B5-J

700 Series C-Face Quilled Reducer
Item #101833979
  • 2 3/8" Center Distance
  • 30:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 3/8" Center Distance
  • 30:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Right Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Box Width 5 7/16 in
Base to Shaft Center Height w/Vert. "J" Base Kit 4.06 in
Output Torque @ RPM 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm
Washdown Duty No
Reduction Type Single Reduction
Output RPM @ Input RPM 58 rpm @ 1750 rpm
Max. Thrust Load @ RPM 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Box Length 6 3/8 in
Fan Cooled No
Bolt Centers w/ Std. Base Kit (in) 7 1/16 x 4 7/8
Bolt Center 5 in x 2 7/8 in
Frame Size 56C
Frame 56C
Max. Overhung Load @ 1750 rpm 900 lb/in
Motor Application General Purpose
Housing Material Cast Iron
Worm Position Universal
Base to Centerline of Output Shaft 2 1/2 in
Input Configuration C-Face Quilled
Bore Code B5
Bolt Center Length x Bolt Center Width 5 in x 2 7/8 in
Output (Shaft or Bore) Size 1 1/8 in
Base to Shaft Center Height w/Low Vert. Base Kit 3.38 in
Input HP @ RPM 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm
Bolt Centers w/ Vertical Base Kits (in) 8.94 x 4.88
Motor HP 1 hp
Output RPM @ 1750 rpm Input 58.33 rpm
Use With 724
Base to Shaft Center Height w/Std. Base Kit 5.19 in
Base to Centerline of Input Shaft 4 7/8 in
Family Name F
Ratio 30:1
Base to Shaft Center Height w/High Vert. Base Kit 5 1/4 in
HP @ RPM 1 hp @ 1800 rpm
Thermal Input Horsepower @ 1750 RPM N/A
Max. Thrust Load @ 1150 rpm 900 lb/in
Center Distance 2 3/8 in
Keyway Size 3/16 x 3/32
Torque Out @ 1750 rpm 1200 in lb
Max. Input HP @ 100 rpm 0.12 hp
Box Height 6 15/16 in
Input (Shaft or Bore) Size 5/8 in
Shaft Assembly Code J
Torque Out @ 1150 rpm 1170 in lb
Lubrication None
Bolt Centers w/ Vertical "J" Base Kit (in) 9.19 x 2.88
Output Configuration Right Output
Max. Overhung Load @ RPM 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Weight 30.1 LB
EAN or UPC 781711520048
NSN Number 6105-01-357-9748
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison