Find a Service Center
- 1 3/4" Center Distance
- 5:1 Ratio
- 56C Frame
- C-Face Quilled Input
- Right Output
features
- Housing is straddle milled top and bottom for precise alignment
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Internal baffles ensure positive, leak-free venting
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Box Width | 5 1/32 in |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Frame | 56C |
| Torque Out @ 1150 rpm | 350 in lb |
| Family Name | F |
| HP @ RPM | 2 hp @ 1800 rpm |
| Worm Position | Universal |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Keyway Size | 3/16 x 3/32 |
| Center Distance | 1 3/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Ratio | 5:1 |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output Torque @ RPM | 350 in lb @ 1150 rpm, 432 in lb @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.17 hp |
| Shaft Assembly Code | J |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Lubrication | None |
| Motor Application | General Purpose |
| Reduction Type | Single Reduction |
| Base | No |
| Box Height | 5 3/4 in |
| Box Length | 5 1/2 in |
| Input HP @ RPM | 1.42 hp @ 1150 rpm, 2.55 hp @ 1750 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Frame Size | 56C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Fan Cooled | No |
| Washdown Duty | No |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Use With | 718 |
| Motor HP | 1 hp |
| Output (Shaft or Bore) Size | 7/8 in |
| Input Configuration | C-Face Quilled |
| Torque Out @ 1750 rpm | 432 in lb |
| Output Configuration | Right Output |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Bore Code | B5 |
| Weight | 19.1 LB |
| EAN or UPC | 781711519233 |
