Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F713-60-B5-G

700 Series C-Face Quilled Reducer
Item #101818367
  • 1.330" Center Distance
  • 60:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.330" Center Distance
  • 60:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.
Thermal Input Horsepower @ 1750 RPM N/A
Torque Out @ 1750 rpm 271 in lb
Frame 56C
Worm Position Universal
Torque Out @ 1150 rpm 201 in lb
Family Name F
Output RPM @ Input RPM 29 rpm @ 1750 rpm
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Base to Centerline of Output Shaft 1.72 in
Output Configuration Left Output
Bore Code B5
Bolt Center Length x Bolt Center Width 3 1/4 in x 2 in
HP @ RPM 0.1666667 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm
Max. Overhung Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Max. Thrust Load @ 1150 rpm 300 lb/in
Use With 713
Box Width 4.03 in
Washdown Duty No
Input Configuration C-Face Quilled
Base No
Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Ratio 60:1
Housing Material Cast Iron
Box Length 4 1/4 in
Shaft Assembly Code G
Output (Shaft or Bore) Size 5/8 in
Base to Centerline of Input Shaft 3 1/16 in
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Bolt Center 3 1/4" x 2"
Max. Thrust Load @ RPM 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm
Box Height 4 21/32 in
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Output Torque @ RPM 201 in lb @ 1150 rpm, 271 in lb @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Frame Size 56C
Max. Overhung Load @ 1750 rpm 200 lb/in
Lubrication None
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Motor Application General Purpose
Input (Shaft or Bore) Size 5/8 in
Output RPM @ 1750 rpm Input 29.2 rpm
Reduction Type Single Reduction
Center Distance 1.33 in
Fan Cooled No
Input HP @ RPM 0.171 hp @ 1150 rpm, 0.22 hp @ 1750 rpm
Max. Input HP @ 100 rpm 0.021 hp
Weight 13.1 LB
EAN or UPC 781711791240
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison