Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F713-5-B5-H

700 Series C-Face Quilled Reducer
Item #101809815
  • 1.330" Center Distance
  • 5:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left & Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.330" Center Distance
  • 5:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left & Right Output

features

  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Bore Code B5
Family Name F
Use With 713
Motor HP 1 hp
Base to Shaft Center Height w/Std. Base Kit 3.47 in
Bolt Center 3 1/4" x 2"
Center Distance 1.33 in
Base to Shaft Center Height w/Vert. "J" Base Kit 2.94 in
Output Configuration Left & Right Output
Input HP @ RPM 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm
Lubrication None
Fan Cooled No
Washdown Duty No
Base to Shaft Center Height w/Low Vert. Base Kit 2.31 in
Max. Thrust Load @ RPM 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm
Base to Shaft Center Height w/High Vert. Base Kit 3.56 in
Max. Overhung Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
HP @ RPM 1 hp @ 1800 rpm
Torque Out @ 1750 rpm 235 in lb
Bolt Centers w/ Vertical "J" Base Kit (in) 6.41 x 2.00
Ratio 5:1
Max. Overhung Load @ 1750 rpm 200 lb/in
Frame Size 56C
Max. Input HP @ 100 rpm 0.091 hp
Box Height 4 21/32 in
Input (Shaft or Bore) Size 5/8 in
Thermal Input Horsepower @ 1750 RPM N/A
Housing Material Cast Iron
Base No
Output RPM @ 1750 rpm Input 350 rpm
Output (Shaft or Bore) Size 5/8 in
Max. Thrust Load @ 1150 rpm 300 lb/in
Box Width 4.03 in
Output Torque @ RPM 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm
Base to Centerline of Input Shaft 3 1/16 in
Reduction Type Single Reduction
Torque Out @ 1150 rpm 200 in lb
Input Configuration C-Face Quilled
Bolt Centers w/ Std. Base Kit (in) 4 3/8 x 3 5/16
Bolt Center Length x Bolt Center Width 3 1/4 in x 2 in
Bolt Centers w/ Vertical Base Kits (in) 6.16 x 3.25
Motor Application General Purpose
Worm Position Universal
Shaft Assembly Code H
Frame 56C
Box Length 4 1/4 in
Base to Centerline of Output Shaft 1.72 in
Weight 13.1 LB
EAN or UPC 781711518717
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison