Skip to content Skip to navigation menu
700 Series Standard Reducer

760-30F-G

700 Series Standard Reducer
Item #101853346
  • 6" Center Distance
  • 30:1 Ratio
  • w/Fan
  • Shaft Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series Standard Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 6" Center Distance
  • 30:1 Ratio
  • w/Fan
  • Shaft Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Ratio 30:1
Motor Application General Purpose
Frame Size Shaft Input, Not a C-Face
Input HP @ RPM 8.39 hp @ 1150 rpm, 12.26 hp @ 1750 rpm
HP @ RPM 10 hp @ 1800 rpm
Output Configuration Left Output
Washdown Duty No
Reduction Type Single Reduction
Max. Overhung Load @ RPM 2400 lb/in @ 1150 rpm, 2400 lb/in @ 1750 rpm
Base to Shaft Center Height w/Low Vert. Base Kit 7.31 in
Output RPM @ 1750 rpm Input 58.33 rpm
Base to Centerline of Input Shaft 12 1/2 in
Housing Material Cast Iron
Shaft Assembly Code G
Max. Thrust Load @ RPM 2100 lb/in @ 1150 rpm, 2100 lb/in @ 1750 rpm
Bolt Center Length x Bolt Center Width 16 1/2 in x 9 1/2 in
Fan Cooled Yes
Bolt Center 16 1/2" x 9 1/2"
Box Height 16 1/2 in
Max. Input HP @ 100 rpm 1.24 hp
Torque Out @ 1150 rpm 11750 in lb
Max. Thrust Load @ 1150 rpm 2100 lb/in
Lubrication None
Max. Overhung Load @ 1750 rpm 2400 lb/in
Base to Centerline of Output Shaft 6 1/2 in
Box Length 14 1/2 in
Bolt Centers w/ Std. Base Kit (in) 16 1/2 x 9 1/2
Bolt Centers w/ Vertical Base Kits (in) 20.88 x 11.75
Torque Out @ 1750 rpm 11219 in lb
Center Distance 6 in
Output RPM @ Input RPM 58 rpm @ 1750 rpm
Input (Shaft or Bore) Size 1 1/2 in
Output (Shaft or Bore) Size 2 1/4 in
Output Torque @ RPM 11219 in lb @ 1750 rpm, 11750 in lb @ 1150 rpm
Thermal Input Horsepower @ 1750 RPM N/A
Box Width 8 1/8 in
Worm Position Universal
Family Name Std Unit
Base to Shaft Center Height w/High Vert. Base Kit 9.63 in
Frame N/A
Base to Shaft Center Height w/Std. Base Kit 7 3/4 in
Input Configuration Shaft Input
Weight 255.1 LB
EAN or UPC 781711468098
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison