Find a Service Center
- 3" Center Distance
- 20:1 Ratio
- Shaft Input
- Left Output
- No Lubricant
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Base to Centerline of Input Shaft | 6 1/4 in |
| Motor Application | General Purpose |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Input Configuration | Shaft Input |
| Output Configuration | Left Output |
| Frame | N/A |
| Box Width | 6 49/64 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Fan Cooled | No |
| Ratio | 20:1 |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Output Torque @ RPM | 2024 in lb @ 1750 rpm, 2470 in lb @ 1150 rpm |
| Reduction Type | Single Reduction |
| Family Name | Std Unit |
| Lubrication | None |
| Frame Size | Shaft Input, Not a C-Face |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Bolt Center | 7 in x 4 in |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Box Height | 8 7/8 in |
| Box Length | 8 45/64 in |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Washdown Duty | No |
| HP @ RPM | 3 hp @ 1800 rpm |
| Center Distance | 3 in |
| Use With | 730 |
| Input HP @ RPM | 2.68 hp @ 1150 rpm, 3.14 hp @ 1750 rpm |
| Torque Out @ 1750 rpm | 2024 in lb |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Torque Out @ 1150 rpm | 2470 in lb |
| Housing Material | Cast Iron |
| Weight | 55.1 LB |
| EAN or UPC | 781711648322 |
