Skip to content Skip to navigation menu
700 Series Standard Reducer

726-30-G

700 Series Standard Reducer
Item #101805888
  • 2 5/8" Center Distance
  • 30:1 Ratio
  • Shaft Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series Standard Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 5/8" Center Distance
  • 30:1 Ratio
  • Shaft Input
  • Left Output
  • Universal Worm Position

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Periodic calibration is necessary to maintain accuracy
  • should be done at least once a year or every 10,000 torque applications
  • Never use on cheater bars
Frame Size Shaft Input, Not a C-Face
Base to Shaft Center Height w/Low Vert. Base Kit 3.63 in
Bolt Center 8 in x 5 1/4 in
Input Configuration Shaft Input
Base to Shaft Center Height w/High Vert. Base Kit 5.59 in
Base to Shaft Center Height w/Std. Base Kit 5.81 in
Torque Out @ 1750 rpm 1521 in lb
Box Height 8 in
Max. Input HP @ 100 rpm 0.16 hp
Shaft Assembly Code G
Output (Shaft or Bore) Size 1 1/8 in
HP @ RPM 1.5 hp @ 1800 rpm
Bolt Centers w/ Vertical Base Kits (in) 10.13 x 5.75
Output RPM @ 1750 rpm Input 58 rpm
Worm Position Universal
Box Width 4 7/16 in
Base to Centerline of Input Shaft 5 9/16 in
Reduction Type Single Reduction
Input (Shaft or Bore) Size 3/4 in
Max. Overhung Load @ 1750 rpm 1000 lb/in
Max. Overhung Load @ RPM 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm
Lubrication None
Torque Out @ 1150 rpm 1575 in lb
Thermal Input Horsepower @ 1750 RPM N/A
Output Configuration Left Output
Box Length 7 3/8 in
Bolt Centers w/ Vertical "J" Base Kit (in) 10.38 x 3.13
Max. Thrust Load @ 1150 rpm 900 lb/in
Input HP @ RPM 1.2 hp @ 1150 rpm, 1.68 hp @ 1750 rpm
Base to Centerline of Output Shaft 2 15/16 in
Output RPM @ Input RPM 58 rpm @ 1750 rpm
Use With 726
Fan Cooled No
Base to Shaft Center Height w/Vert. "J" Base Kit 4.75 in
Motor Application General Purpose
Family Name Std Unit
Center Distance 2.625 in
Bolt Centers w/ Std. Base Kit (in) 8 x 5 1/4
Max. Thrust Load @ RPM 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Housing Material Cast Iron
Ratio 30:1
Output Torque @ RPM 1521 in lb @ 1750 rpm, 1575 in lb @ 1150 rpm
Frame N/A
Washdown Duty No
Weight 41.1 LB
EAN or UPC 781711517505
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison