
- 1.540" Center Distance
- 20:1 Ratio
- Shaft Input
- Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardianâ„¢ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
Use With | 715 |
Reduction Type | Single Reduction |
Thermal Input Horsepower @ 1750 RPM | N/A |
Output Torque @ RPM | 380 in lb @ 1150 rpm, 435 in lb @ 1750 rpm |
Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
Frame Size | Shaft Input, Not a C-Face |
Bolt Center Length x Bolt Center Width | 5 1/4 in x 4 5/16 in |
Family Name | Std Unit |
Input Configuration | Shaft Input |
Shaft Assembly Code | J |
Torque Out @ 1750 rpm | 435 in lb |
Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
Output RPM @ 1750 rpm Input | 87.5 rpm |
Washdown Duty | No |
Input (Shaft or Bore) Size | 5/8 in |
Box Height | 5 3/8 in |
Max. Thrust Load @ 1150 rpm | 400 lb/in |
Fan Cooled | No |
Worm Position | Universal |
Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
Motor Application | General Purpose |
Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
Base to Centerline of Output Shaft | 1 29/32 in |
Frame | N/A |
Bolt Center | 5 1/4 in x 4 5/16 in |
Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
Input HP @ RPM | 0.43 hp @ 1150 rpm, 0.72 hp @ 1750 rpm |
Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
Output Configuration | Right Output |
Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
Torque Out @ 1150 rpm | 380 in lb |
Max. Overhung Load @ 1750 rpm | 300 lb/in |
Box Width | 3 11/16 in |
Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
Output (Shaft or Bore) Size | 3/4 in |
Center Distance | 1.54 in |
Lubrication | None |
HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
Box Length | 5 1/8 in |
Base to Centerline of Input Shaft | 3 29/64 in |
Housing Material | Cast Iron |
Max. Input HP @ 100 rpm | 0.056 hp |
Ratio | 20:1 |
Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
Weight | 17.1 LB |
EAN or UPC | 781711516416 |
