713-15-H X

S/R Worm Gear Reducer Coupled With no Base

Item #102858290

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

HP @ RPM	0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm
Output (Shaft or Bore) Size	5/8 in
Input HP @ RPM	0.37 hp @ 1150 rpm, 0.56 hp @ 1750 rpm
Box Length	4 1/4 in
Use With	713
Base to Shaft Center Height w/Std. Base Kit	3.47 in
Bolt Centers w/ Vertical Base Kits (in)	6.16 x 3.25
Input Configuration	Shaft Input
Base to Shaft Center Height w/Vert. "J" Base Kit	2.94 in
Frame Size	Shaft Input, Not a C-Face
Fan Cooled	No
Bolt Centers w/ Vertical "J" Base Kit (in)	6.41 x 2.00
Family Name	Std Unit
Box Height	4 21/32 in
Bolt Centers w/ Std. Base Kit (in)	4 3/8 x 3 5/16
Input (Shaft or Bore) Size	1/2 in
Motor Application	General Purpose
Washdown Duty	Yes
Frame	N/A
Base to Shaft Center Height w/High Vert. Base Kit	3.56 in
Ratio	15:1
Max. Input HP @ 100 rpm	0.049 hp
Center Distance	1.33 in
Box Width	2 7/8 in
Output RPM @ 1750 rpm Input	117 rpm
Output Configuration	Left & Right Output
Output RPM @ Input RPM	117 rpm @ 1750 rpm
Base to Shaft Center Height w/Low Vert. Base Kit	2.31 in
Weight	11.0 LB