Find a Service Center
Alternate Products
- Finished Steel Gear
- 12 Diametral Pitch
- 20.0° Pressure Angle
- 21 Teeth
- 1 3/4" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Hub Dia. | 1.39 in |
| Bore Size | 0.75 in |
| Keyway | w/Setscrew |
| Outside Dia. | 1.92 in |
| Pitch Diameter | 1.75 in |
| Set Screw | Yes |
| Torque at 200 RPM | 413 lb/in |
| Torque at 300 RPM | 388 lb/in |
| Length Through Bore | 1.62 in |
| Origin | Finished Bore |
| Torque at 1800 RPM | 201 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| No. of Teeth | 21 |
| Set Screw Size | 3/4 |
| Torque at 900 RPM | 282 lb/in |
| Diametral Pitch | 12 |
| Material | Steel |
| Bore Type | Finished |
| Torque at 1200 RPM | 249 lb/in |
| Torque at 600 RPM | 327 lb/in |
| Pressure Angle | 20 ° |
| Weight | 0.751 LB |
| EAN or UPC | 781711461655 |
