Find a Service Center
Alternate Products
- Finished Steel Gear
- 20 Diametral Pitch
- 20.0° Pressure Angle
- 24 Teeth
- 1.200" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Parallel shaft applications
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
| Hardened Teeth | Without Hardened Teeth |
| Torque at 1200 RPM | 61.9 lb/in |
| Origin | Finished Bore |
| Torque at 200 RPM | 91.3 lb/in |
| Outside Dia. | 1.3 in |
| Torque at 300 RPM | 87.1 lb/in |
| Pressure Angle | 20 ° |
| Material | Steel |
| Set Screw | Yes |
| Torque at 1800 RPM | 51.9 lb/in |
| No. of Teeth | 24 |
| Hub Dia. | 0.92 in |
| Diametral Pitch | 20 |
| Pitch Diameter | 1.2 in |
| Length Through Bore | 0.94 in |
| Set Screw Size | 1/2 |
| Keyway | w/Setscrew |
| Bore Type | Finished |
| Torque at 900 RPM | 68.5 lb/in |
| Torque at 600 RPM | 76.7 lb/in |
| Bore Size | 0.5 in |
| Weight | 0.231 LB |
| EAN or UPC | 781711461341 |
