Find a Service Center
- 6" Center Distance
- 300:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Output RPM @ 1750 rpm Input | 5.8 rpm |
| Max. Overhung Load @ 1750 rpm | 2400 lb/in |
| Fan Cooled | No |
| Max. Thrust Load @ 1150 rpm | 2100 lb/in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 7.31 in |
| Output (Shaft or Bore) Size | 2 1/4 in |
| Center Distance | 6 in |
| Box Width | 19 1/8 in |
| Base to Centerline of Input Shaft | 7 1/4 in |
| Base to Shaft Center Height w/Std. Base Kit | 7 3/4 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 9.63 in |
| Box Height | 16 1/2 in |
| Shaft Assembly Code | G |
| Torque Out @ 1750 rpm | 18500 in lb |
| Lubrication | None |
| Output Configuration | Left Output |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | WA |
| Worm Position | Universal¦Parallel |
| Bolt Centers w/ Vertical Base Kits (in) | 20.88 x 11.75 |
| Frame | N/A |
| Input (Shaft or Bore) Size | 7/8 in |
| Torque Out @ 1150 rpm | N/A |
| Reduction Type | Double Reduction |
| Box Length | 10 7/8 in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Ratio | 300:1 |
| Washdown Duty | No |
| Motor Application | General Purpose |
| Housing Material | Cast Iron |
| Input Configuration | Shaft Input |
| Base to Centerline of Output Shaft | 10 in |
| Bolt Center | 12 3/4" x 6 3/8" |
| Bolt Centers w/ Std. Base Kit (in) | 16 1/2 x 9 1/2 |
| Frame Size | Shaft Input, Not a C-Face |
| Weight | 315.1 LB |
| EAN or UPC | 781711523711 |
