SSF726-5A-B9-J

700 Series C-Face Quilled, Hollow Output Cast Stainless Reducer

Item #103351148

Universal Worm Position

Mobil SHC634 Synthetic Lubricant

316 Cast Stainless Steel

+ Show More

Auto Replenish

each One-time purchase

Product Details

Housing, bearing carrier and flange are made from 316 cast stainless steel to withstand hostile environments
304 stainless steel output shaft
All stainless steel hardware
Output bearing carries o-ring sealed
Double lipped oil seals
PosiVent™ system eliminates breather vent and keeps contaminants
Internal pressure equalization system allows gearbox to operate without the use of conventional pressure vents
Lubricated for life with Mobil® SHC634 synthetic oil for wide temperature ranges
Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Ideal for use with filters and lubricators
Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types

Specifications

HP @ RPM	5 hp @ 1800 rpm
Input HP @ RPM	4.05 hp @ 1150 rpm, 6.11 hp @ 1750 rpm
Box Width	5 29/32 in
Torque Out @ 1150 rpm	1000 in lb
Worm Position	Universal
Max. Overhung Load @ 1750 rpm	1000 lb/in
Output Torque @ RPM	1000 in lb @ 1150 rpm, 1034 in lb @ 1750 rpm
Output Configuration	Right Output
Output RPM @ Input RPM	350 rpm @ 1750 rpm
Center Distance	2.625 in
Frame Size	180TC, 210C
Bore Code	B9
Ratio	5:1
Max. Thrust Load @ 1150 rpm	900 lb/in
Base to Centerline of Output Shaft	2 15/16 in
Washdown Duty	Yes
Input (Shaft or Bore) Size	1 1/8 in
Output RPM @ 1750 rpm Input	350 rpm
Bolt Center	6 3/8 in x 3 3/8 in
Output (Shaft or Bore) Size	1 1/8 in
Max. Overhung Load @ RPM	1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm
Thermal Input Horsepower @ 1750 RPM	N/A
Motor Application	Washdown Duty
Torque Out @ 1750 rpm	1034 in lb
Base to Centerline of Input Shaft	5 9/16 in
Fan Cooled	No
Frame	180TC, 210C
Use With	726
Housing Material	316 Stainless Steel
Input Configuration	C-Face Quilled
Family Name	SSF
Shaft Assembly Code	J
Lubrication	Mobil SHC634 Synthetic
Box Length	7 3/8 in
Reduction Type	Single Reduction
Max. Thrust Load @ RPM	900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Box Height	8 in
Weight	0.0 LB
EAN or UPC	781711341124