SFWC718V-300-B5-G-

700 Series C-Face Quilled, Hollow Output Double Reduction Right Angle Reducer

Item #102816804

Vertical, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Super finished oil seal diameters on both input and output shafts extend seal life

Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Bolt Center	5 7/8 in Diameter
Input Configuration	C-Face Quilled
Installed Options	Flanged Base
Worm Position	Vertical¦Right Angle
Max. Thrust Load @ 1150 rpm	500 lb/in
Output (Shaft or Bore) Size	1 in
Box Height	5 3/4 in
Reduction Type	Double Reduction
Washdown Duty	No
Center Distance	1 3/4 in
Fan Cooled	No
Thermal Input Horsepower @ 1750 RPM	N/A
Max. Overhung Load @ 1750 rpm	500 lb/in
Base to Centerline of Input Shaft	4 1/2 in
Output Configuration	Left Output
Box Length	5 1/16 in
Torque Out @ 1150 rpm	N/A
Housing Material	Cast Iron
Shaft Assembly Code	G
Base to Centerline of Output Shaft	N/A
Bore Code	B5
HP @ RPM	0.1666667 hp @ 1800 rpm
Output RPM @ 1750 rpm Input	5.8 rpm
Lubrication	None
Frame Size	56C
Ratio	300:1
Torque Out @ 1750 rpm	690 in lb
Box Width	8 7/8 in
Motor Application	General Purpose
Frame	56C
Input (Shaft or Bore) Size	5/8 in
Family Name	SFWC
Weight	29.0 LB