Find a Service Center
- 3" Center Distance
- 20:1 Ratio
- C-Face Coupled
- Right Output
- 180TC/210C Frame
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Ratio | 20:1 |
| Lubrication | None |
| Fan Cooled | No |
| HP @ RPM | 3 hp @ 1800 rpm |
| Input Configuration | C-Face Coupled |
| Washdown Duty | No |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Frame | 180TC, 210C |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Output Torque @ RPM | 2024 in lb @ 1750 rpm, 2470 in lb @ 1150 rpm |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Torque Out @ 1750 rpm | 2024 in lb |
| Reduction Type | Single Reduction |
| Torque Out @ 1150 rpm | 2470 in lb |
| Motor Application | General Purpose |
| Use With | 730 |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Family Name | RF |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Input HP @ RPM | 2.68 hp @ 1150 rpm, 3.14 hp @ 1750 rpm |
| Box Length | 8 1/8 in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Box Height | 8 7/8 in |
| Center Distance | 3 in |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Output Configuration | Right Output |
| Frame Size | 180TC, 210C |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Box Width | 6 49/64 in |
| Bolt Center | 7 in x 4 in |
| Worm Position | Universal |
| Weight | 66.1 LB |
| EAN or UPC | 781711607534 |
