
- 3" Center Distance
- 10:1 Ratio
- C-Face Coupled
- Left Output
- 140TC/180C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Only the end user or a qualified underwriter is to identify and select the proper class, group, division and temperature code motor to meet the requirements of each installation
- Service center personnel can advise what listings and approvals motors carry, but cannot evaluate nor recommend what motors may be suitable for use in hazardous environments
Base to Centerline of Input Shaft | 6 1/4 in |
Frame Size | 140TC, 180C |
Box Length | 8 1/8 in |
Output Torque @ RPM | 1787 in lb @ 1750 rpm, 2107 in lb @ 1150 rpm |
Box Width | 6 49/64 in |
Input (Shaft or Bore) Size | 7/8 in |
Output (Shaft or Bore) Size | 1 1/4 in |
Use With | 730 |
Washdown Duty | No |
Lubrication | None |
Center Distance | 3 in |
Reduction Type | Single Reduction |
Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
Fan Cooled | No |
Output RPM @ 1750 rpm Input | 175 rpm |
Family Name | RF |
Base to Centerline of Output Shaft | 3 1/4 in |
Bolt Center | 7 in x 4 in |
Ratio | 10:1 |
Box Height | 8 7/8 in |
Torque Out @ 1150 rpm | 2107 in lb |
Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
HP @ RPM | 5 hp @ 1800 rpm |
Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
Torque Out @ 1750 rpm | 1787 in lb |
Motor Application | General Purpose |
Worm Position | Universal |
Output Configuration | Left Output |
Max. Thrust Load @ 1150 rpm | 1000 lb/in |
Input Configuration | C-Face Coupled |
Input HP @ RPM | 4.25 hp @ 1150 rpm, 5.28 hp @ 1750 rpm |
Frame | 140TC, 180C |
Thermal Input Horsepower @ 1750 RPM | N/A |
Max. Overhung Load @ 1750 rpm | 1250 lb/in |
Housing Material | Cast Iron |
Weight | 66.1 LB |
EAN or UPC | 781711607848 |
